Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:RongHao Industry Garden,Xi'an,Shaanxi,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
The wear type of me Your current location:Home >> The wear type of me
The wear type of metal baler
Author : admin Time : 2020-10-28 AllPageView : 76
 The wear type of metal baler What are the types of wear of the metal baler?

One is normal wear,which is very special due to the allowable range specified by the baler design.When in the initial stage,because the friction surface has a certain roughness,the wear is faster.However,in the later stage,as the surface is gradually smoothed,it is also a normal and stable wear stage,that is,the friction surface is slightly worn and slowly and stable,which has little effect on the performance of the metal baler.

There is also adhesive wear.This type of wear usually occurs at the actual contact point,that is,the place where the solid phase welding of the hydraulic baler occurs.In this case,the material on the contact surface transfers from one surface to another.Adhesive wear has a relatively large impact on the baler.If the wear is severe,it will cause damage to the equipment.
Nick mechanical pressing technology and finishing technology have reached the international advanced level.Choose the metal baler produced by Nick Machinery,so you have no worries.

Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:RongHao Industry Garden,Xi'an,Shaanxi,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD